不銹鋼材質的3041.4313是馬氏體級，耐侵蝕性好，熱解決后耐久性性好。X3CrNiMo13-4鋼的自動化設備特性是可能化學反應組分中鉬和鎳的高含磷量。那些合金鋼增長劑受限制了提升級碳含磷量的必須——給定有機廢氣濃度等于于奧氏體不銹鋼材質的304。其實鎳含磷量較低，但鎳含磷量約為4%，特殊提供了鋼對所有侵蝕生態的減少力——三次自動化設備特性。X3CrNiMo13-4鋼用戶的可生育多達300℃在氣溫下作業的元件和元件，并且被表露在所有侵蝕生態中的元件，而且持續足以的表面上標準括抗氯化物概念)。QT650.QT780和QT900標準下，熱解決后最先交由鋼管。半成品使用在發熱能源生育.藍翔塑業久久久久久久综合-久久久久久久久18久久久-久久久久久久久综合-伊人久久久久久久久久久久所生產的.在冶金餐飲行業和發熱能源餐飲行業，渦輪機機被表露在高溫和性恒溫下.泵.降低機零件。鋼不適反應合電弧焊接。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50批發商EN1.4313馬氏體不繡鋼兼具固溶處理基本特征（+A）的情況、回火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，應該哪一款 一定的要跟業務部門說清哦。